Valitse maa, johon lähetys toimitetaan

Ei käytettävissä

Rode NT55-MP Overhead-mikrofoni

Ei käytettävissä

Rode NT55-MP Overhead-mikrofoni

Certified matched pair of externally biased condenser microphone from RØDE. Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable...
Lue lisää
Ei käytettävissä
Tämä tuote ei ole saatavilla. Suosittelemme, että asetat saatavuushälytyksen.

Tuotekoodi: NT55-MP | ID: 315348

Rode NT55-MP Overhead-mikrofoni

Certified matched pair of externally biased condenser microphone from RØDE. Like the NT5, the RØDE NT55 is a small-diaphragm, true-condenser cardioid microphone, sometimes referred to as a 'pencil mic'. The NT55 adds both a three position pad (0, -10dB, -20dB) and three stage high pass filter (Off, 75Hz, 150Hz), and includes the interchangeable NT45-O omnidirectional capsule.

Intended for recording acoustic instruments, drum overheads, cymbals and live performances, the compact externally polarized mic employs a 1/2" capsule, an active J-FET impedance converter with bipolar output buffer.

Its tight cardioid pickup pattern also makes it ideal for use as an indoor dialogue microphone for filmmaking on a mic stand or boom.

Tarkempaa kuvausta omalla kielelläsi ei ole vielä saatavilla. Englanninkielinen kuvaus saattaa auttaa.
  • Finished in durable satin nickel
  • Cardioid or Omni polar pattern using included interchangable capsules
  • Gold sputtered 0.50" capsule
  • Three position PAD – 0 dB, -10 dB and -20 dB
  • Three position High-Pass Filter - flat, 75 Hz and 150 Hz
  • Low noise
  • The NT55 is designed and made in Australia
  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 0.50"
  • Polar Pattern: Cardioid, Omnidirectional
  • Address Type: End
  • Frequency Range: 20 Hz - 20 kHz
  • Output Impedance: 100 Ohm
  • Maximum SPL: 136 dB
  • Maximum Output Level: 8.0 mV (@ 1 kHz, 1% THD into 1 KOhm load)
  • Sensitivity: -38.0 dB re 1 Volt/Pascal (12.60 mV @ 94 dB SPL) +/- 2 dB @ 1 kHz
  • Equivalent Noise Level (A-weighted): 15 dBA
  • Power Options: +48 V phantom power
  • Output: XLR
  • Dimensions: 145 x 20 x 20 mm
  • Weight: 110 g

Toiminnot
Ominaisuudet

Taajuusalue

Impedanssi

Akustiikka

Äänenpainetaso (SPL)

Pakkaus

Tarjous sisältää

Mitat ja paino

Paino

Maa

Valmistettu

Australia