Valitse maa, johon lähetys toimitetaan
Käytämme evästeitä varmistaaksemme sivustomme toimivuuden. Kun annat suostumuksesi, käytämme evästeitä analysoimaan liikennettä ja personoimaan mainontaa kolmannen osapuolen mainosalustoilla, aina tietosuojakäytännön sääntöjen mukaisesti.
Toimittanut
Tuotekoodi: GREEN-3 | ID: 401535
Both the Black3 and Green3 use a three piece OTL cantilever that has a Grado specific diamond mounted on a brass bushing. The Green3 are hand selected from Black3 production runs which meet higher test specifications. Approximately 15% of the run usually exhibits these specs and become a Green3.
Grado’s OTL, or optimized transmission line, technology provides an ideal transfer of signal from the surface of the LP to the generator of the system. This technology rejects unwanted resonances and lowers distortion preserving the fundamental and harmonic frequencies of the music. This also helps keep noise generated by the motor system in the cartridge to a minimum.
Grado’s OTL stylus/cantilever design makes records sound quieter, improves the height, width, and depth of the soundstage, and present more detail than previously obtainable.
The Black3 & Green3 are all hand assembled by Grado Labs team in Brooklyn, with some builders having over 25 years of experience. With the recent development of the highly received Lineage Series of cartridges, they were able to have a trickle down of technology and bring a new technique to the Black3 & Green3. This updated series of cartridges offers excellent tonal balance, dynamics, and realism, for a most rewarding reproduction of vocals and instruments. Grado Labs coil winding techniques, using ultra high purity copper wire which were honed during the development of the Lineage Series, have let the electrical circuits achieve unison between the four coils in each phono cartridge. This allows for a precise balance between channels and accurate stereo imaging.
As in all Grado phono cartridges the Black3 & Green3 are powered by a twin magnet system that optimizes the balance between stereo channels. All internal magnetic circuit parts are held to extremely high tolerances creating the desired stereo imaging. Grado’s patented Flux-Bridger design allows the Black3 & Green3 to have one of the lowest effective moving mass generating systems while creating an excellent balance throughout the full frequency range.
Muoto
Neulanpaino
Suositeltu neulanpaino
1,5 g
Taajuusvaste
10 Hz - 50 kHz
Vaatimustenmukaisuus
20
Suositeltu kuormitusvastus
47 kOhm
Kanavien erottelu 1 kHz:n taajuudella
30 dB
Pakkauskoko (kpl)
1
Jännite
Paino
5,5 g
Valmistettu
USA
Kaikki arvostelut tulevat vahvistetuilta asiakkailta, jotka ovat ostaneet meiltä tuotteen aikaisemmin.
Kaikki arvostelut
Николай Т.
Bulgaria
17.04.2024
Arvioitu versio
Дозата е перфектна!
Näytä alkuperäinen
Stanislaw P.
Bulgaria
10.04.2024
Arvioitu versio
Много ми допада характера на тази доза. Добре изразени ниски и среди, които иначе не са много в моята система. Топло аналогово усещане, много подходящо за рок и метъл.
Näytä alkuperäinen
Csaba D.
Hungary
19.02.2024
Arvioitu versio
Még tesztelem de idáig minden megfelelő.
Näytä alkuperäinen
Zoltán B.
Hungary
18.02.2024
Arvioitu versio
Ár- érték arányban jó hangszedő, én meg vagyok elégedve a hangjával! Egyedül a csomagolása, ami elég puritán, legalább egy normális dobozolást elvártam volna!
Näytä alkuperäinen